VTech IP Phone DS6472-6 Manuel D’Utilisation

64

You have two ways to begin a PTT call:

If you have two handsets, press and hold 

PUSH TO TALK when 

handset is not in use.
If you have three or more handsets, press 

PUSH TO TALK when the 

handset is not in use. Then use the dialing keys to enter a handset 

number (

1-9 for handsets 1-9, 

 and 0 for handset 10, 

 and 

1 for handset 11 or 

 and 

2 for handset 12), or press   or   to 

scroll to the desired handset then press 

. Press 

 or 

PUSH TO TALK to create the push-to-talk session.

Your handset displays 

Connecting to HANDSET X... for a few seconds. 

When the connection is made, both your and the destination handsets 

display 

Press and hold [PTT] to talk and beep once.

Press and hold 

PUSH TO TALK on your handset. A chirp indicates your 

microphone is on. Speak towards the handset. Your voice is broadcast 

to the destination handset. While you are speaking, the handset displays 

PTT To HANDSET X (X represents the destination handset number).
Release 

PUSH TO TALK after speaking. All handsets beep once again. 

After the handsets beep, you can press and hold 

PUSH TO TALK to 

continue speaking or the destination handsets can respond (see  

Answer a PTT call on page 66).
Press 

 or 

 to end the PTT call. The handset displays 

Push to talk Ended for a few seconds.
- OR -
Place the handset in the telephone base or charger to end the PTT call.

1.

•

•

2.

3.

4.

After 

PUSH TO TALK is released, the PTT call remains open for a short 

time. If no one presses 

PUSH TO TALK within 10 seconds, the PTT call 

ends automatically.