VTech IP Phone DS6472-6 Manuel D’Utilisation

66

You can respond to a PTT call whenever the speakerphone light is off, as 

described below.

When your handset receives a PTT call, the handset beeps and displays 

Press and hold [PTT] to talk.
When the other party is speaking, your speakerphone light is on, and your 

handset displays 

PTT From HANDSET X To handset: Y (X represents 

the originating handset and 

Y represents the destination handset; a 

maximum of four handset numbers appear).
When your speakerphone light is off and the handset displays 

hold [PTT] to talk, press and hold PUSH TO TALK on your handset. 

When you hear a chirp, speak towards the handset.

While you are speaking, your handset displays 

(

X represents the handset numbers of one or more destination 

handsets; a maximum of four handset numbers appear).
Your voice is broadcast to all destination handsets.

After speaking, release 

PUSH TO TALK. Your handset will beep. After the beep, 

if your speakerphone light is off, you can press and hold 

PUSH TO TALK to 

speak again or the destination handset can respond.

You can convert a one-to-one PTT session to an intercom call.

When your handset displays 

Press and hold [PTT] to talk, press 

. Your handset displays 

Switch to Intercom?  Press 

  

to confirm. 

If you have two handsets, your handset displays 

Calling other handset. 

The destination handset temporarily displays 

Push to talk Ended and 

then 

Other handset is calling. 

If you have three or more handsets, your handset displays 

HANDSET Y (Y represents the destination handset). The destination 

handset temporarily displays 

Push to talk Ended and then Handset X 

is calling (X represents the originating handset).

On the destination handset, press 

 or 

to answer the 

intercom call. Both handsets now display 

Intercom.

To end the intercom call, press 

, 

, or place the handset in 

the telephone base or charger. Both handsets display 

Intercom ended.

1.

2.

3.

•

•

1.

•

•

2.

3.