Xantrex AC to DC Converter XADC Manuel D’Utilisation

Installation Instructions

975-0301-01-01

3

1. Before installing and using the XADC, read all instructions and cautionary 

markings on the XADC, the batteries, and all appropriate sections of this 
guide.

2. Do not expose the XADC to rain, snow, spray, or water. To reduce risk of fire 

hazard, do not cover or obstruct the ventilation openings. Do not install the 
XADC in a zero-clearance compartment. Overheating may result.

3. To avoid a risk of fire and electric shock, make sure that existing wiring is in 

good condition and that wire is not undersized. Do not operate the XADC 
with damaged or substandard wiring.

4. Do not operate the XADC if it has received a sharp blow, been dropped, or 

otherwise damaged in any way. If the XADC is damaged, see the Warranty 
section.

5. Do not disassemble the XADC. It contains no user-serviceable parts and 

attempting to service the XADC will void your warranty. See Warranty for 
instructions on obtaining service. Attempting to service the XADC yourself 
may result in a risk of electrical shock or fire as the XADC remains charged 
after all power is disconnected.

6. To reduce the risk of electrical shock, disconnect both AC and DC power 

from the XADC before attempting any maintenance or cleaning or working 
on any circuits connected to the XADC. 

7. Never place the charger directly above or below the battery being charged: 

gases or fluids from the battery will corrode and damage the charger. Locate 
the charger as far away from the battery as the DC cables permit

The Xantrex AC to DC Converter is not intended for use in connection with life support 
systems or other medical equipment or devices.

This section contains important safety and operating instructions. Read and keep these 
Installation Instructions for future reference.