Xantrex AC to DC Converter XADC Manuel D’Utilisation

Xantrex AC to DC Converter

4

975-0301-01-01

3. Make sure the area around the battery is well ventilated.

4. Never smoke or allow a spark or flame near the engine or batteries.

5. Use caution to reduce the risk or dropping a metal tool on the battery. It could 

spark or short circuit the battery or other electrical parts and could cause an 
explosion.

6. Remove all metal items, like rings, bracelets, and watches when working with 

lead-acid batteries. Lead-acid batteries produce a short circuit current high 
enough to weld metal to skin, causing a severe burn.

7. Have someone within range of your voice or close enough to come to your aid 

when you work near a lead-acid battery.

8. Have plenty of fresh water and soap nearby in case battery acid contacts skin, 

clothing, or eyes.

9. Wear complete eye protection and clothing protection. Avoid touching your 

eyes while working near batteries.

10. If battery acid contacts skin or clothing, wash immediately with soap and 

water. If acid enters your eye, immediately flood it with running cold water 
for at least twenty minutes and get medical attention immediately.

11. If you need to remove a battery, always remove the ground terminal from the 

battery first. Make sure all accessories are off so you don’t cause a spark.

1. Working in the vicinity of batteries may be dangerous. Batteries generate 

explosive gases during normal operation, therefore, you must read this guide 
and follow the instructions exactly before installing or using your XADC.

2. This equipment contains components which tend to produce arcs or sparks. 

To prevent fire or explosion, do not install the XADC in compartments 
containing batteries or flammable materials, or in locations that require 
ignition-protected equipment. This includes any space containing gasoline-
powered machinery, fuel tanks, as well as joints, fittings, or other connections 
between components of a fuel system.