EXP Computer PathBuilder S200 Manuel D’Utilisation

Page de 162
114 
Bridging
Mixed LAN Operation
Mixed LAN Operation
Overview
PathBuilder S24x, 26x, and 27x switches support a mixture of Token Ring and 
Ethernet interfaces configured on the same node. This means the PathBuilder S24x, 
26x, and 27x switch is able to perform remote Transparent bridging for Ethernet 
LANs and remote Source Route Bridging from the same PathBuilder S24x, 26x, and 
27x switch, as shown in Figure 54.
Figure 54. Example of Mixed LAN Bridging in PathBuilder S24x, 26x, 
and 27x Switch
Mixed LAN 
Environment 
Limitations
These limitations apply when you perform Mixed LAN bridging in a PathBuilder 
S24x, 26x, and 27x switch:
• The PathBuilder S24x, 26x, and 27x switch is limited to only one Spanning 
Tree Entity (SPTE) per node. If you perform automatic spanning tree in a 
Mixed LAN implementation, SPTE may prohibit traffic from passing between 
LANs by blocking some bridge links to avoid bridge looping.
• You must install Release 4.90 or above operating software on all PathBuilder 
S24x, 26x, and 27x switches in your network to perform Mixed LAN opera-
tion on any node in the network. If you have a mixture of nodes running ear-
lier operating software releases, mixed LAN operation will cause node 
crashes. A PathBuilder S24x, 26x, and 27x switch used as a router and config-
ured for Mixed LAN operation is not impacted by this limitation.
PB S200
WAN
Port 13
Port 19
Ethernet 2
Ethernet 1
Ethernet 2
Ethernet 1
PB S200