Canon DP-V3010 Manuel D'Instructions
49
OSD Menu
Item
Setting Options (underline indicates factory default)
Time Code
Display the time code superimposed on the SDI signal.
Note
• When "Test Pattern" is "On", "Time Code" is not performed.
Enable
Switches the time code display On, Off.
On, Off
On, Off
Type
Selects the type.
VITC, LTC
VITC, LTC
Size
Selects the size.
Large, Small
Large, Small
Test Pattern
Sets the test pattern built into the main unit.
White, Gray (20%), Black, Ramp, 5 Step, Color Bars, PLUGE, Off
White, Gray (20%), Black, Ramp, 5 Step, Color Bars, PLUGE, Off
Note
• If the power is turned off once and then back on, the test pattern will not be displayed.
• The test pattern will be erased in the following cases:
• The test pattern will be erased in the following cases:
- When calibration has been started
- When the channel is changed using the CH button, F button assigned for Channel UP/
- When the channel is changed using the CH button, F button assigned for Channel UP/
Channel DOWN, or "Select Channel" under "Channel Settings"
- When changing "Input Configuration" or "Select Input Signal" under "Channel Settings"
- When "Reset All Settings" is executed
- When "Reset All Settings" is executed
Settings Export/Import
Sets the export/import main menu settings.
Note
• The following settings cannot be exported or imported. This is also true when "All" is selected.
- "Calibration" of "Adjustment" (including calibration result)
- "CDL Override" and "Test Pattern" of "Function Settings"
- "Date/Time" of "System Settings"
- Settings of CDL
- "CDL Override" and "Test Pattern" of "Function Settings"
- "Date/Time" of "System Settings"
- Settings of CDL
• Data exported from this product may not be imported to products of which firmware version
is earlier than the version of this product.To import data, update the firmware to the latest
version.
version.
Export
Execute: Performs export.
Import
Settings (All, Adjustment, Channel Settings, Display Settings, Marker Settings, Function
Settings, System Settings): Select the setting to import.
Execute: Performs import.
Settings, System Settings): Select the setting to import.
Execute: Performs import.
COP
Y