Canon DP-V3010 Manuel D'Instructions
51
OSD Menu
Item
Setting Options (underline indicates factory default)
Display Controller Function Sets the function to assign to the F button on the display controller. Select an F button and assign a
function from the following list. The factory defaults for the display controller F buttons is as follow:
F1 :
F1 :
H Delay (On, Off)
F2 :
V Delay (On, Off)
F3 :
Monochrome (On, Off)
F4 :
Blue Only (On, Off)
F5 :
Red Off (On, Off)
F6 :
Green Off (On, Off)
F7 :
Blue Off (On, Off)
F8 :
Screen Scaling (Native Input Resolution, 200%, Automatic)
F9 :
Backlight Scan (On, Off)
F10 :
Knob Lock (On, Off)
The following functions can also be assigned:
Channel UP
Channel DOWN
Backlight Control(Local Dimming (High, Middle, Low), Global Dimming, Off)
Aspect Marker (On, Off)
Safety Zone Marker 1, 2 (On, Off)
Center Marker (On, Off)
Grid Marker (On, Off)
Time Code (On, Off)
Show OSD (On, Off)
CDL Override (On, Off)
CDL Save to Memory
CDL Load from Memory
CDL Export/Import
Peaking (Peaking 1/Peaking 2/Off)
Channel UP
Channel DOWN
Backlight Control(Local Dimming (High, Middle, Low), Global Dimming, Off)
Aspect Marker (On, Off)
Safety Zone Marker 1, 2 (On, Off)
Center Marker (On, Off)
Grid Marker (On, Off)
Time Code (On, Off)
Show OSD (On, Off)
CDL Override (On, Off)
CDL Save to Memory
CDL Load from Memory
CDL Export/Import
Peaking (Peaking 1/Peaking 2/Off)
Note
• When changing channels with "Channel UP/DOWN", the channels with "Input Configuration"
(
40) set to "–" are skipped.
• When the "Backlight Control" setting is switched using an F button, the information is applied
to "Backlight Control" in "Picture Mode". Likewise, when any marker settings are changed,
those changes will be applied to "Enable" under the currently selected "Marker Preset".
those changes will be applied to "Enable" under the currently selected "Marker Preset".
Display Controller Channel
Sets the channel to assign to the CH button on the display controller.
Select a CH button and register a channel number. A list of settings under the menu "Channel
Settings" (
Select a CH button and register a channel number. A list of settings under the menu "Channel
Settings" (
40) is displayed.
Display Name
Sets the name of the main unit. You can input up to 16 alphanumeric characters.
Date/Time
Sets the year/month/date/hour/minute.
Power Indicator Brightness Adjusts the brightness of the power indicator on the main unit. 5 is the brightest.
Off, 1 to 5 (2)
Protect Settings
Locks the settings so they cannot be changed. When you press the MENU button, "Signal/System
Information" appears, but other operations are grayed out because they are locked.
OK: Performs protect settings.
Cancel: Returns to the previous screen without protect settings.
Information" appears, but other operations are grayed out because they are locked.
OK: Performs protect settings.
Cancel: Returns to the previous screen without protect settings.
• Unlocking Protect Settings
Move the selection frame to "Protect Settings" and press the SET button for approximately 3
seconds.
Move the selection frame to "Protect Settings" and press the SET button for approximately 3
seconds.
COP
Y