Universal Electronics Thermostat 975 Manuel D’Utilisation

is 3 hours and 45 minutes. Cooling
can start earlier because it takes
longer for cooling systems to reach
the desired temperature.

To select or deselect this feature,
refer to the CONFIGURATION
section (page 24, step 1).

Adjustable

Adjustable
Temperature Display.

Temperature Display.

Temperature Display.
The room temperature display can
be adjusted to read higher or lower
by following the configuration menu
and adjusting the temperature to a
higher or lower value. The thermo-
stat is calibrated at the factory to
display a very accurate room
temperature, but due to various
conditions and/or personal prefer-
ence, you may wish to adjust the
thermostat display higher or lower
(up to 5°F). For example, if the

thermostat displays a room
temperature of 70° but you want it
to display

73°

, you can adjust it. To

adjust, refer to the CONFIGURA-
TION section (page 25, step 8).

Factory Preprogrammed

Factory Preprogrammed
Times and Temperatures.

Times and Temperatures.

Times and Temperatures.
This thermostat has been pro-
grammed at the factory. The chart in
the programming examples section
lists these factory settings. If the
times and temperatures are the same
as your schedule, you may simply
run the factory installed program by
pressing PROGRAM

RUN

Arm Chair Programming.

Arm Chair Programming.
The thermostat uses 24 VAC power
supplied by the system for normal
operation. However, if the installed
“AA” batteries are providing

sufficient power, you can program
the thermostat away from the wall.
If the thermostat indicates low
battery power (

CHECK BAT-

TERY

), refer to the Battery Back-up

feature (page 37).

Programmable Fan Control.

Programmable Fan Control.
This feature allows you to have your
fan operate continuously through
one or more programmed time
periods. This is useful if you want to
have constant air circulation in your
location during a specific time
period. If you do not use this
feature, the fan will cycle normally
with the heating and cooling system.

Automatic Changeover.

Automatic Changeover.
If you have a heating/cooling
system, the thermostat can be set to
automatically switch the system

Features