Pelco PelcoNet NET300 Multimedia Transmission Via Network C2908M-B Manuel D’Utilisation
26
C2908M-B (4/05)
CONNECTING TO A LAN
Refer to Figure 18. You can connect the NET300 to a 10/100BASE-T network either directly or through a hub. To do so, plug a standard Cat5 UTP
cable with RJ-45 connectors into the NET300’s Ethernet socket.
cable with RJ-45 connectors into the NET300’s Ethernet socket.
Figure 18.
Connecting to the LAN Port
CONNECTING POWER
The NET300 has no power switch. The power supply comes with the attached orange terminal block plug. To apply power do the following:
1. Depending on your country, it may be necessary to attach an appropriate adapter (supplied) to the power supply. If necessary, do so.
correspond to the + and – labeling on the NET300.
3. Plug the power supply into an electrical outlet.
Ethernet
IN2
IN1
R
R +
GND