Справочник Пользователя для Pelco PelcoNet NET300 Multimedia Transmission Via Network C2908M-B

 

26

C2908M-B (4/05)

 

Refer to Figure 18. You can connect the NET300 to a 10/100BASE-T network either directly or through a hub. To do so, plug a standard Cat5 UTP 
cable with RJ-45 connectors into the NET300’s Ethernet socket.

 

Connecting to the LAN Port

 

The NET300 has no power switch. The power supply comes with the attached orange terminal block plug. To apply power do the following:

1. Depending on your country, it may be necessary to attach an appropriate adapter (supplied) to the power supply. If necessary, do so.

2. Refer to Figure 17. Push the orange terminal block into the plug-in base next to the Ethernet port on the NET300. The wires on the plug 

correspond to the + and – labeling on the NET300.

3. Plug the power supply into an electrical outlet.

Ethernet

IN2

IN1

R

R +

GND