Panasonic Arbitrator 360 Manuel
ArbitratorSI-1.9.2-AdminManual-revB.doc
17
•
Amount of time the system fans have been operating.
•
Amount of time the cameras have been operating.
Software
The following settings will adjust the software application’s graphic features:
•
Auto Logoff- When enabled, the user will be automatically logged off when the application is closed.
•
Auto Logon- When enabled, the application will automatically enter user information in the Login Tab (a
user list must be sent to Arbitrator SI for user information recognition when signing in to laptop).
user list must be sent to Arbitrator SI for user information recognition when signing in to laptop).
•
Day/Night View Auto Switch Enabled-
When enabled, switch to day/night view is permitted when current
time meets configured switch time.
•
Snapshot Dir-Indicates the directory where the snapshots are saved (C:\SI\Snapshots\).
•
Start in Day View-Indicates whether the software application settings should start up in day view graphic
mode. Settings include True and False.
mode. Settings include True and False.
•
Switch to Day (or Night) View at-sets time when the application should automatically change between
day and night graphical interface. Settings are time based in hours and minutes.
day and night graphical interface. Settings are time based in hours and minutes.
Triggers
Set GPIO Triggers
Arbitrator can set up to 8 GPIO Triggers. These selections can be configured based on the needs of individual
departments as follows:
departments as follows:
GPIO-setting controls whether or not the inputs being monitored are on or off.
Trigger (1 through 8)
•
Action-This setting determines what happens when the selected trigger has been initiated. Each of these
actions has their own detection zone. Settings include REC (Start System Recording), CAM1REC (Start
Camera 1 Recording), CAM2REC (Start Camera 2 Recording), STOP (Stop System Recording), CAM1
(Switches to Camera 1), CAM2 (Switches to Camera 2), AUTOZOOM (Triggers the Camera’s Auto Zoom) and
CAM1LED (Triggers the Camera’s LED).
actions has their own detection zone. Settings include REC (Start System Recording), CAM1REC (Start
Camera 1 Recording), CAM2REC (Start Camera 2 Recording), STOP (Stop System Recording), CAM1
(Switches to Camera 1), CAM2 (Switches to Camera 2), AUTOZOOM (Triggers the Camera’s Auto Zoom) and
CAM1LED (Triggers the Camera’s LED).
•
Detection-Enter conditions for detection of the trigger. Note: These settings are based on the action
you’ve selected. Settings include: H (High-edge Trigger), Level H (High-level Trigger), L (Low-edge
Trigger), Level L (Low-level Trigger), and B (Double-edge Trigger).
you’ve selected. Settings include: H (High-edge Trigger), Level H (High-level Trigger), L (Low-edge
Trigger), Level L (Low-level Trigger), and B (Double-edge Trigger).
•
Name-Is the label or description of the trigger entered in the free form text field.
•
Printable-This function assigns a letter to be shown on the OSD (On-Screen Display). Settings include A-Z.