TANDBERG 1700 MXP Manuel D’Utilisation
D 13954.01
MAY 2006
MAY 2006
12
TANDBERG 1700
MXP
USER GUIDE
IEEE802.1x
Control Panel > Network Settings > LAN Settings
Touch tones
Snapshot
Camera Presets
Touch tones
Snapshot
Camera Presets
CANCEL
Select this icon and press
OK
to leave the menu undoing any
changes.
changes.
RESTORE DEFAULTS
Select this icon and press
OK
to restore the default settings.
SAVE
Select this icon and press
OK
to leave the menu putting
changes into effect.
MODE
The system may be connected to an IEEE 802.1x
LAN network. Supported 802.1x protocols are
EAP-MD5, EAP-PEAP and EAP-TTLS. The 802.1x
authentication are enabled by setting 802.1x
Mode to On.
LAN network. Supported 802.1x protocols are
EAP-MD5, EAP-PEAP and EAP-TTLS. The 802.1x
authentication are enabled by setting 802.1x
Mode to On.
On
. 802.1x authentication enabled
Off
. 802.1x authentication disabled
ANONYMOUS IDENTITY
The 802.1x Anonymous ID string is to be used as
unencrypted identity with EAP types that support
different tunneled identity, EAP-PEAP and EAP-
TTLS. The anonymous ID, if set, will be used for
the initial (unencrypted) EAP Identity Request.
unencrypted identity with EAP types that support
different tunneled identity, EAP-PEAP and EAP-
TTLS. The anonymous ID, if set, will be used for
the initial (unencrypted) EAP Identity Request.
IDENTITY
The 802.1x Username is the username needed
for 802.1x authentication.
for 802.1x authentication.
PASSWORD
The 802.1x Password is the password needed for
802.1x authentication.
802.1x authentication.
EAP-MD5
On
On
. The EAP-MD5 protocol is enabled
Off
. The EAP-MD5 protocol is disabled
EAP_TTLS
On
On
. The EAP_TTLS protocol is enabled
Off
. The EAP_TTLS protocol is disabled
EAP-PEAP
On
On
. The EAP_PEAP protocol is enabled
Off
. The EAP_PEAP protocol is disabled
Note!
802.1x wireless LAN is not supported.