TANDBERG 1700 MXP Manuel D’Utilisation
D 13954.01
MAY 2006
MAY 2006
128
TANDBERG 1700
MXP
USER GUIDE
Data Port
Control Panel > Network Settings > Data Port
Touch tones
Snapshot
Camera Presets
CANCEL
Select this icon and press
OK
to leave the menu undoing any
changes.
changes.
RESTORE DEFAULTS
Select this icon and press
OK
to restore the default settings.
SAVE
Select this icon and press
OK
to leave the menu putting
changes into effect.
DATA PORT
The system provides up to two standard RS232 serial ports
to allow a computer to be connected for data transfer and
control purposes. Note that when connecting to a PC, the
connecting cable must be a straight through RS232 cable.
Set
to allow a computer to be connected for data transfer and
control purposes. Note that when connecting to a PC, the
connecting cable must be a straight through RS232 cable.
Set
Baud Rate
,
Parity
,
Databits
, and
Stopbits
as required for
your application.
A succesful connection of a PC to Data port 1, requires that
the PC and the system are identically configured.
The control interface provided by the data port supports
a subset of the Hayes command set as well as a compre-
hensive set of system specific commands. It maintains
communication with the data port’s command interpreter at
all times. All features available from the hand-held remote
control can be accessed through the data port.
A succesful connection of a PC to Data port 1, requires that
the PC and the system are identically configured.
The control interface provided by the data port supports
a subset of the Hayes command set as well as a compre-
hensive set of system specific commands. It maintains
communication with the data port’s command interpreter at
all times. All features available from the hand-held remote
control can be accessed through the data port.