Panasonic Arbitrator 360 Mode D’Emploi
(3) REC/Play Set up
Power off time setting after
shutting down the ignition
Initial camera select,
camera 1 or 2
Initial Audio 2 setting,
INCAR, 2
nd
WMIC or LINK CAM
Start recording
when VPU is turned on
1 fps (frame per sec)
recording
Recording mode: F-2Mbps (720x480, 30fps)
F-1Mbps (720x480, 10fps), Q-1Mbps (320x240, 30fps)
Q-512kbps (320x240, 30fps)
Recording will continue up to
1,2,5,10,15,20,30, 60, 90,
or Continue even if
pressing STOP button
Set Pre Rec Time
(0 to 90 seconds)
(0 to 90 seconds)
Set Post Rec Time
(0 to 90 seconds)
Press “APPLY” to apply
the setting changes.
the setting changes.
Enable or disable output of
recording error status as GPIO9
recording error status as GPIO9
Enable or disable output of
recording status as GPIO9
recording status as GPIO9