Napoleon Grills PTH38PCP Manuel D’Utilisation
14
MAINTENANCE/STORAGE
MAINTENANCE/STORAGE
MAINTENANCE :
To enjoy years of outstanding performance from your heater make sure
you perform the following maintenance activities on a regular basis:
you perform the following maintenance activities on a regular basis:
Keep exterior surfaces clean.
Use warm soapy water for cleaning. Never use flammable of
corrosive cleaning agents.
While washing your unit, be sure to keep the area around the burner
and pilot assembly dry at all times. If the gas control is exposed to
water in any way, do NOT try to use it. It must be replaced.
corrosive cleaning agents.
While washing your unit, be sure to keep the area around the burner
and pilot assembly dry at all times. If the gas control is exposed to
water in any way, do NOT try to use it. It must be replaced.
Air flow must be unobstructed. Keep controls, burner, and circulating
air passageways clean. Signs of possible blockage include:
air passageways clean. Signs of possible blockage include:
Gas odor with extreme yellow tipping of flame.
Heater does NOT reach the desired temperature.
Heater does NOT reach the desired temperature.
Heater makes popping noises.
Heater glow is excessively uneven.
Spiders and insects can nest in burner or orifices. This dangerous
condition can damage heater and render it unsafe for use. Clean
burner holes by using a heavy-duty pipe cleaner. Compressed air may
help clear away smaller particles.
condition can damage heater and render it unsafe for use. Clean
burner holes by using a heavy-duty pipe cleaner. Compressed air may
help clear away smaller particles.
Carbon deposits may create a fire hazard. Clean dome and engine with
warm soapy water if any carbon deposits develop.
warm soapy water if any carbon deposits develop.
WARNING
DO NOT touch or move heater for at least
45 minutes after use.
Allow all burner elements to cool before
touching.
FOR YOUR SAFETY :
NOTE
In a salt-air environment (such as near an
ocean). corrosion occurs more quickly
than normal. Frequently check for
corroded areas and repair them promptly.
STORAGE :
Between uses:
During periods of extended inactivity or when transporting;
NOTE
Wait until heater is cool before covering.
Turn the control knob to "OFF" position.
Turn LP cylinder to "OFF" position.
Store heater upright in an area sheltered from direct contact with
inclement weather (such as rain, sleet, hail, snow, dust and debris).
If desired, cover heater to protect exterior surfaces and to help prevent
debris in air passages.
Turn LP cylinder to "OFF" position.
Store heater upright in an area sheltered from direct contact with
inclement weather (such as rain, sleet, hail, snow, dust and debris).
If desired, cover heater to protect exterior surfaces and to help prevent
debris in air passages.
Turn the control knob to "OFF" position.
Disconnect LP Cylinder and move to a secure, well-ventilated location
outdoors.
Disconnect LP Cylinder and move to a secure, well-ventilated location
outdoors.
Do NOT store in a location that will exceed 125 degrees F.
The propane cylinder must be stored outdoors in well-ventilated area,
and it must be out of reach of children, and not in a building,
garage or any other enclosed area.
and it must be out of reach of children, and not in a building,
garage or any other enclosed area.
Store heater upright in an area sheltered from direct contact with
inclement weather (such as rain, sleet, hail, snow, dust and debris).
If desired, cover heater to protect exterior surfaces and to help prevent
debris in air passages.
inclement weather (such as rain, sleet, hail, snow, dust and debris).
If desired, cover heater to protect exterior surfaces and to help prevent
debris in air passages.