Force10 Networks Force10 TeraScale E-Series E1200i Manuel D’Utilisation

Installing and Maintaining the E1200i System

73

A factory-installed air filter (

) is shipped with the E1200i system. The hot-swappable air filter 

prevents large particles, debris, and dust from entering and circulating through the system, and ensures 
proper air flow through the system. Filters should be inspected monthly and replaced every twelve months 
or as required. 

To remove and replace the air filter: 

Figure 27   Replacing the Air Filter 

Warning: An improperly installed air filter will restrict air flow and will generate thermal problems 
throughout the chassis. Ensure the air filter is oriented correctly and seated securely in the slot. 

Do not operate without a filter for any longer than 30 minutes to avoid card over-temperature conditions.

1.

Pull the air filter straight out of the chassis.

2.

Rotate the replacement filter so that the front handle label is right reading. 

3.

Guide the filter firmly into the slot until it stops.