Compaq 326817-003 Manuel D’Utilisation
2-2 Compaq DAT AutoLoader Reference Guide
Compaq Confidential – Need to Know Required
Writer: Debbie McRill Project: Compaq DAT AutoLoader Reference Guide Comments:
Part Number: 326817-003 File Name: c-ch2 Installation.doc Last Saved On: 2/15/00 10:55 AM
■
Compaq SmartStart and Support Software CD
■
Configuring the AutoLoader
The default hardware settings are set for a Compaq system (see Figure 2-1).
The settings in the DAT AutoLoader can be changed if required by a particular
system.
The settings in the DAT AutoLoader can be changed if required by a particular
system.
Figure 2-1. Autoloader jumper pins
Table 2-1
Hardware Settings
Jumper
Description
Default
1
SCSI ID Bit 0
OFF
2
SCSI ID Bit 1
ON
3
SCSI ID Bit 2
ON
4
Reserved
OFF
5
Reserved
OFF
6
Parity Enable
ON
Note: The default SCSI ID is set to 6. For other settings see, Table 2-2