Motorola Car Satellite Radio System DSR-6400 Manuel D’Utilisation

Press the 4 button until the cursor is at the 525 label, and press ENTER to move into the field. 

This field allows selection of the output format for 525-line video as either NTSC or PAL-M. Use 
the  buttons to specify the desired option and press ENTER to confirm the selection. 

Pressing ENTER causes the following caution message to appear.

Press any arrow button (4) to back out of the field and leave it unchanged, or press 

ENTER to proceed. 

Press the 4 button until the cursor is at the 625 label, and press ENTER to move into the field. 

This field allows selection of the output format for 625-line video as PAL-625 or PAL-N. Use the 
 buttons to specify the desired option and press ENTER to confirm the selection. Pressing 

ENTER causes the following caution message to appear.

Press any arrow button (4) to back out of the field and leave it unchanged, or press 

ENTER to proceed.

Press the  buttons until the Firmware menu appears. This menu displays the unit's firmware 

release information, which is equivalent to the product version number. This menu cannot be 
changed, but since the firmware is periodically updated, this menu confirms that the update was 
successful. This menu is used most commonly in troubleshooting. The High version value (shown 
below) is the current firmware version.

This field displays the version of boot, FPGA, and the high code. The boot code is loaded at the 
factory. The FPGA and high codes may be upgraded to later versions by a download that is 
delivered over the satellite signal from either the L-band or ASI input. The code versions are 
represented by a six-digit hexadecimal number. This field is non-editable.

Press E to continue or    to stop

CAUTION: Change will interrupt service

Press E to continue or    to stop

CAUTION: Change will interrupt service

FIRMWARE   Boot:FPGA:High    Upgrade

   E    XXXXXX:XXXXXX:XXXXX   000000