Motorola Car Satellite Radio System DSR-6400 Manuel D’Utilisation

Use this menu to review the Acquisition Recovery map. This menu is used most commonly in 
troubleshooting. Press the  buttons until the DR menu appears.

This non-editable field displays the DR modes:

DISABLED

Acquisition Recovery is off.

CHANNEL

The unit uses the virtual channel (provided by the uplink) to search

 

for a live channel.

XPNDR

The unit uses the currently-defined transponder definitions from the 

 

uplink provider to search for a live frequency.

This non-editable field displays the Acquisition Recovery map’s Virtual Channel Table (VCT) number 
(0 to 65535) that is currently specified by the uplink programmer (BNC). If the VCT is not available, 
the unit displays (00000).

If this field is non-editable. The four dashes (----) designate that no virtual channels are currently 
being provided from the uplink provider. 

If the MODE field displays CHANNEL and the uplink provider is providing one or more valid 
maps, then this field displays the selection icon ( ). Use the up and down buttons () to view 

the list of channels that are currently being supplied by the uplink provider.

This non-editable field displays one of the following three messages:

NA

The VCT is either not available or the uplink provider set it to 00000.

NOT DEFINED

The decoder is not available to map a VCT or a configured port.

 

This means the channel’s port is not configured.

1,X0(20),H

Input port number (1-8) that is associated with the specified

 

channel (followed by a comma), the Satellite name,

 

the Satellite ID within brackets, (followed by a comma), 

 

the polarity specified with either H (for Horizontal)

 

or V (for Vertical).

DR  MODE       VCT    VCN   PORT

    E DISABLED   (00000) ----

NA