BENDIX BW2809 Manuel D’Utilisation

 

 

Page 7

 

   

      

 

These icons indicate the battery life of the handheld device at startup.  
This icon is located in the lower left area of the Tool display. 
 
To continue, press the Check mark. To turn off the Tool and replace 
the batteries, press the X. 

 

This icon indicates the battery life of the handheld device. 
 

Initiation 

This icon is used to indicate initiation. When the Initiate button is 
selected, this icon starts to blink during transmission. 

 

This icon indicates Tool initiation failure. This could be caused by 
either a low battery in the wheel sensor or the Tool. 

 

This icon is used to indicate the set-up menu. When this button is 
selected and held for 2 seconds the set-up menu appears. Refer to 
Menu Options for more information to set-up specific options. 

Learn 

This icon is used to indicate sensor Learn. When the Learn button is 
selected this icon starts to blink during transmission. 

 

 

 
If the Initiate button is pressed, the Tool will retrieve the sensor ID, pressure data and battery status 
from the sensor that is displayed 
 

  The button should be pressed only once to activate. 
  The battery icon is used to show the battery status of the sensor.  

 

Check icons indicates the sensor is OK.  

  

The Wrench icon indicates the sensor is due for a change at next service. 

 
If an error occurs, such as no information has been received, an error screen will appear.  Should this 
happen, retry the Initiate Function.