Speed Queen AWN432SP113TW04 Manuel De Montage

WARNING

Improper connection of the equipment earth/ground
conductor can result in a risk of electric shock.
Check with a qualified electrician or service person if
you are in doubt as to whether the washer is proper-
ly connected to a protective earth/ground.

W822

• DO NOT modify the plug provided with the washer – if it

will not fit the outlet, have a proper outlet installed by a quali-
fied electrician.

• If the laundry room’s electrical supply does not meet the

above specifications and/or if you are not sure the laundry
room has an effective earth/ground, have a qualified electri-
cian or your local electrical utility company check it and cor-
rect any problems.

WARNING

This unit is equipped with a three-prong (earth/
ground) plug for your protection against shock haz-
ard and should be plugged directly into a protective
earth/ ground three-prong receptacle. Do not cut or
remove the earth/ground prong from this plug.

W823

Add Water to the Washer

To prevent damage to pump, do not run washer before adding at
least one quart [0.95 liter] water to the tub. If the washer is run
before any water is added, the pump seal may overheat, causing
the pump to leak. Once installed, the water retained in the drain
system from the previous cycle will provide sufficient cooling to
prevent pump seal damage.

NOTE: The agitator should not be removed except for
service. The washtub is designed to be self-cleaning.

W391I_SVG

Figure 12

Check Lid Switch

Washer should stop filling, agitating, and spinning when lid is
opened.

W376I_SVG

Figure 13

Check Installation

1. Refer to Installer Checklist on the back cover of this manual

and make sure that washer is installed correctly.

2. Run washer through one complete cycle to make sure it is op-

erating properly.

Installation

Part No. 203174