GE GFXP1308FMC Manuel De Montage

A   Carefully lay down the appliance to access 

the leveling legs on its bottom. The washer 

shipping bolts must remain in place until the 

washer is returned to an upright position.
Washer – Lay on its back
Dryer – Lay on its side

B   Use an adjustable wrench to remove the 

washer or dryer leveling legs.

Remove the packaging.
Flatten the product carton to use as a pad to lay 

the washer or dryer down on its side. Continue using 

the carton to protect the finished floor in front of the 

installation location.

ˆ

 

4 Mounting screws - 

Dryer

ˆ

 

4 Mounting bolts - 

Washer

ˆ

 

Drawer divider

ˆ

 

Phillips-head  

screwdriver

ˆ

 

9/16” socket wrench

ˆ

 

8 mm socket wrench

ˆ

 

10” Adjustable 

wrench

Read these instructions completely and carefully.
•

 – Save these instructions for local 

inspector’s use.

 – Observe all governing codes and 

ordinances.

Note to Consumer – Keep these instructions for future 

reference.

•

 

Completion time – 1 to 2 hours

•

 

Proper installation is the responsibility of the installer. 

•

 

Product failure due to improper installation is not 

covered under the Warranty

.

•

 

See washer and dryer Owner’s Manual & Installation 

Instructions for additional installation requirements and 

guidelines.

White Pedestal: GFXP1308FWW

Red Pedestal: GFXP1308FRR

Metallic Carbon Pedestal: GFXP1308FMC
For Washer Models:
GFWS2500, GFWS2505, GFWS2600, GFWS2605, 

GHWS3600, GHWS3605, GFWS3700 and GFWS3705
For Dryer Models:
GFDS250, GFDS255, GFDS260, GFDS265, GHDS360,  

GHDS365, GFDS370 and GFDS375