Thermador PRG304GH Manuel De Montage

Page de 64
English 15
Step 8: Door Removal and 
Reinstallation
CAUTION
USE CAUTION WHEN REMOVING THE 
DOOR. THE DOOR IS VERY HEAVY. 
Make sure oven is cool and power to oven 
has been turned off before removing the 
door. Failure to do so could result in electri-
cal shock or burns. 
The oven door is heavy and fragile. Use 
both hands to remove or replace the door. 
Grasp only the sides of the oven door 
when removing or replacing it. 
Failure to grasp the oven door firmly and 
properly could result in personal injury and 
product damage. 
With the door off, never release the levers 
and try to close the hinges. Without the 
weight of the door, the powerful springs will 
snap the hinges closed with great force. 
To Remove the Oven Door: 
1. Fully open the oven door. 
2. Flip the hinge clip toward you (see illustration at right). 
3. Close the door until it stops; the open hinge clip will 
hold the door about halfway open. 
4. Grasp the door on the sides. The door is heavy and 
fragile - always use both hands. Lift the door up and 
out (there will be some spring resistance to overcome). 
When the front of the door is high enough, you will be 
able to pull the door straight out. 
5. Place the door in a safe and stable location. 
To Reinstall the Oven Door: 
1. Hold door on both sides. Insert hinges into hinge slots. 
The door will be about halfway open. It may be 
necessary to press firmly inward on the lower portion of 
the door, using a rocking motion to fully seat the door's 
hinges. 
2. Open door all the way to expose hinge clips. Push 
hinge clips away from you (toward the oven) until they 
meet the hinge. 
3. Close and open the door slowly to test the installation. 
It should open and close smoothly and be straight, not 
crooked. 
Photo A: Hinge bracket in closed position
Photo B: Flip hinge clip toward you
Photo C: Hinge removed from oven