Samsung RS25H5111SR Utilisation Et Entretien
English - 11
01
SETTING
UP
Installing the handles
Take the handles out of the right side door.
The handles are included in the box.
How to install the handles
Orient each handle so that the end with the sticker
attached is at the top and the holes with the
tightening screws are facing each other.
Then, follow the directions below to install each
handle.
attached is at the top and the holes with the
tightening screws are facing each other.
Then, follow the directions below to install each
handle.
Fix the handles to the doors
by sliding them down firmly.
by sliding them down firmly.
( 1 )
( 3 )
( 2 )
( 4 )
( 5 )
L
S
L
S
REMOVING THE REFRIGERATOR
DOORS
DOORS
If your entrance won’t allow the refrigerator to pass
easily through it, you can remove the refrigerator
doors.
To remove the doors, follow the steps below.
If you do not need to remove the doors, go to
“Leveling the Refrigerator” on page 14.
easily through it, you can remove the refrigerator
doors.
To remove the doors, follow the steps below.
If you do not need to remove the doors, go to
“Leveling the Refrigerator” on page 14.
Tools You'll Need
Philips
Screwdriver
Flat-blade
Screwdriver
10 mm Socket
Wrench
1. Remove the Front Leg Cover
Open both the freezer and refrigerator doors.
Unscrew the three screws holding the front leg
cover in place by turning them counter-clockwise.
When the screws are loose, remove the front leg
cover.
Unscrew the three screws holding the front leg
cover in place by turning them counter-clockwise.
When the screws are loose, remove the front leg
cover.
Screw
Front leg cover
DA68-02981B-01.indb 11
2014. 1. 6. �� 1:50