Samsung RS25H5111SR Utilisation Et Entretien

English - 12

2. Separate the water supply line from 
the refrigerator

1.  Remove two water lines by pressing the each 

coupler ( 

1 ) and pulling the water lines ( 2 ) 

away.

(1)

(2)

Do not cut the water line. 
Gently separate it from the coupler.

3. Remove the freezer door 

A few things to mention first.

•  Make sure that you lift the door straight up so 

the hinges are not bent or broken.

•  Be careful not to pinch the water tubing and 

wire harness on the door.

•  Place doors on a protected surface to prevent 

scratching or damage.

•  Is necessary, have two people disassemble the 

doors.

1.  With the Freezer door closed, remove the 

upper hinge cover ( 

1 ) using a screwdriver, 

and then disconnect the wires by gently pulling 
them apart ( 

2 ). 

(2)

(1)

Be careful not to damage the sensor 
harness with the hinge cover.

2.  Remove the hinge bolts ( 

3 ) with a 10 mm 

Socket Wrench. 
Remove the ground screw ( 

4 ) by turning it 

counter-clockwise. 
Take off the upper hinge ( 

5 ) in the direction of 

the arrow. 
Take care that the door does not fall on you.

(4)

(3)

(5)

Pressing

3.  Open the Freezer door, and then remove the 

door from the lower hinge ( 

6 ) by carefully lifting 

it up ( 

7 ).

(7)

(6)

DA68-02981B-01.indb   12

2014. 1. 6.   �� 1:50