Samsung RF26J7500 Utilisation Et Entretien
English - 20
( 8 ) Filter
Water filter usage
This icon lights up when you need to change
the filter, usually after the refrigerator has
dispensed about 300 gallons of water (after
about 6 months). After you install the new water
filter, reset the filter indicator by touching and
holding the Hold 3sec for Filter Reset button for
3 seconds.
This icon lights up when you need to change
the filter, usually after the refrigerator has
dispensed about 300 gallons of water (after
about 6 months). After you install the new water
filter, reset the filter indicator by touching and
holding the Hold 3sec for Filter Reset button for
3 seconds.
- If water is not dispensing or dispensing
slowly, you need to replace the water filter
because the water filter is clogged.
because the water filter is clogged.
- Some areas have large amounts of lime in
their water, which causes the water filter to
clog more quickly.
clog more quickly.
( 9 ) Ice Type
Touch this button to select your desired ice type.
Cubed and crushed ice modes alternate when
you press the button.
This mode can not be used with the Water mode
simultaneously.
Cubed and crushed ice modes alternate when
you press the button.
This mode can not be used with the Water mode
simultaneously.
( 10 ) Ice Maker Off / Control Lock (3sec)
The Ice Maker Off button serves two purposes:
- To turn the Ice maker on and off
- To turn the Control Lock Function on and off.
1. Ice Off Function
If you don’t want to make more ice, press the Ice
Maker Off button.
If you don’t want to make more ice, press the Ice
Maker Off button.
2. Control Lock Function
Touch and hold this button for 3 seconds to lock
the display and the dispenser buttons so the
buttons can not be used.
When Control Lock is on, the refrigerator does
not dispense ice or water, even if the Dispenser
Lever is pressed.
The Control Lock icon lights up to indicate
you’ve activated the Control Lock function.
Press 3 seconds to unlock.
Touch and hold this button for 3 seconds to lock
the display and the dispenser buttons so the
buttons can not be used.
When Control Lock is on, the refrigerator does
not dispense ice or water, even if the Dispenser
Lever is pressed.
The Control Lock icon lights up to indicate
you’ve activated the Control Lock function.
Press 3 seconds to unlock.
Cooling Off Mode
Cooling Off mode (also called Shop mode),
is designed for use by retailers when they are
displaying refrigerators on the shop floor.
In Cooling Off mode, the refrigerator’s fan motor
and lights work normally, but the compressors
do not run, and the refrigerator and freezer do
not get cold.
To start Cooling Off mode, touch and hold the
Freezer, Alarm and Fridge buttons for 5 seconds
during normal operation.
The refrigerator chime sounds and the
temperature display flashes OFF.
To cancel Cooling Off mode, touch and hold
the Freezer, Alarm and Fridge buttons again for
5 seconds.
Cooling Off mode (also called Shop mode),
is designed for use by retailers when they are
displaying refrigerators on the shop floor.
In Cooling Off mode, the refrigerator’s fan motor
and lights work normally, but the compressors
do not run, and the refrigerator and freezer do
not get cold.
To start Cooling Off mode, touch and hold the
Freezer, Alarm and Fridge buttons for 5 seconds
during normal operation.
The refrigerator chime sounds and the
temperature display flashes OFF.
To cancel Cooling Off mode, touch and hold
the Freezer, Alarm and Fridge buttons again for
5 seconds.
DA68-02601D-00.indb 20
14. 11. 24. �� 11:08