Elica ENM230 Manuel De Montage

The charcoal filter is not washable. It should last up to 6 months

with normal use.

1. Replace metal grease filter with a charcoal filter. For

information on ordering, see the “Accessories” section.

To replace filter:

Remove screw from the grease filter retainer.
Turn the grease filter retainer to release filter.
Reinstall the filter by placing the back edge in the channel at 

 rear of hood. Push filter into place, turn the filter retainer to 

 secure filter to range hood.

Turn off the range hood and allow the light bulb to cool. 

Disconnect power.
Squeeze the plastic lens cover and remove it from the hood.
Screw a new 120v 75W (maximum), A19 light bulb into 

  socket.  

  NOTE: In two lamps ERS models, use two 40W light bulbs 

 instead of 75W.

Replace lens cover by squeezing cover and inserting tabs 

  into slots. 

 

 

 

 

 

 

 

 

 

 

Reconnect power.
If new light does not operate, make sure the lamp is inserted 

correctly before calling service. 

A. Light bulb socket (A19)
B. Lens cover

A

B

Turn off the range hood and allow the halogen lamp to cool. To

avoid damage or decreasing the life of the new bulb, do not

touch bulb with bare fingers. Replace bulb, using tissue or

wearing cotton gloves to handle bulb.

If new lamps do not operate, make sure the lamps are inserted

correctly before calling service. 

Disconnect power.
Push up on the lens and turn it counterclockwise.
Remove the bulb and replace it with a 120-volt, 50-watt  

  maximum halogen bulb with a GU10 base.  

  Turn it clockwise to lock it into place.

Repeat steps 2-3 for the other bulbs if needed.
Reconnect power.