Elica ENM230 Manuel De Montage

Make Electrical Connection 

Disconnect power. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Use UL listed wire connectors and connect white wires (A) 

 

together.
Use UL listed wire connectors and connect black wires (B) 

 

together.
Connect green (or bare) ground wire from power supply to 

 

green ground screw in terminal box. Be sure the ground wire 

 

is secured and the screw is well tight. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

A. White wires
B. Black wires

C. UL listed wire connector
D. Green (or bare) ground wire

E. Home power supply cable

F. UL listed or CSA approved 

½" strain relief

G. Green ground screw

A

B

C

D

E

F

G

 Install terminal box cover.

Reconnect power.

For the ESN130 and EFS130 series install the 75 W (max.) 

  incandescent light bulb and for the ERS230 series install the 

 40 W (max.) incandescent light bulb. For the ENM230 and 

 ENM236 series install the 50W (max) halogen lamps. See 

  Range Hood Care section.

Replace grease filter if removed. See the “Range Hood Care” 

  section.

Check the operation of the range hood fan and light. See 

  “Range Hood Control” section. 

  If range hood does not operate, check to see whether a 

  circuit breaker has tripped or a household fuse has blown. 

  Disconnect power and check wiring connections.
NOTE: To get the most efficient use from your new range hood,

read the “Range Hood Control” section. 

Push the light switch to the left to turn the light Off. Push the light switch to the right
 to the turn the light On.

Push the fan switch to the left for Low speed. Push the fan switch to the right for 
High speed. Push the fan switch to the middle for Off.

B. Fan speed switch

A

B

On 

Low  

High