Thermador PRD366GHU Mode D'Emploi

Page de 132
English 21
stops over the front of the rail guides. Slide the rack 
into position.
Removing racks from oven: To remove racks or 
reposition racks in the oven, pull the rack toward the 
front of the oven. Lift up the front of the rack over the 
safety stops and pull from the oven.
Place oven racks in desired positions before turning on 
the oven. 
When placing food on a rack, pull the rack out to the 
stop position. The racks are designed to lock and not 
tilt when pulled forward.
Bake Rack Positions 
Rack level positions in the oven are numbered like an 
elevator. Number one level is the lowest.
 
Rack Positions
One Rack Baking 
The Bake mode is best for baking on one rack with 
rack level #3 used for most baked items. If the item is 
tall, such as an angel food cake, rack level #2 may be 
used. Pies are best baked on rack level #2 to make 
certain the bottom of the crust is done without over 
browning the top. When large pieces of meat or poultry 
are roasted, such as a prime rib of beef or a turkey, 
rack level #2 is the preferred rack. 
Two Rack Baking 
Rack levels #2 and #4 or #5 may be used when baking 
on two levels. Foods such as cookies and biscuits work 
well using these two racks. Casserole dishes may also 
be baked using these two levels. 
Three Rack Baking 
If three-rack baking is desired, the Convection Bake 
mode should be used. 
 Figure 22: Gliding Oven Rack
 Figure 23: Rack Installation Detail
Always 
remove 
before 
Self Clean
Important: When placing the gliding rack in the oven, 
make sure the front supports on the rack guides rest in 
the large slots at the front corners of the rack. This is 
necessary to keep the rack locked into position while
fully inserted into the oven.
 Figure 24: Oven Rack Positions
5
4
3
2
1