British Telecom Granite 43685 Manuel D’Utilisation

9

If you experience any problems, please call the Helpline on 0808 100 6556*

Getting started

Providing you have subscribed to your network’s 

Caller Display service, the date and time is set 

automatically for all handsets when you receive 

your first call.
The date and time is recorded with each 

answering machine message you receive.
If you do not have a Caller Display service you can 

set the date and time manually.

You can set the time format to the 12 or 24 hour 

clock. You can also change the date format to 

present the day or the month first, see page 27.

When setting the time and date on one handset, 

any other handsets registered to the base are also 

updated automatically.
If the time or date format is adjusted then only 

the handset being used will be updated, all 

others will need to be changed independently 

if required.

Setting up for multiple packs

If you have purchased a BT Granite multiple pack, you will need to prepare any 
additional handsets and chargers for use.

For each additional handset and charger:

1.  Insert the power adaptor with the red connector (item code 045982) into the 

underside of the charger. Plug the other end into the mains wall power socket 
and switch on.

2.  Insert the battery in the handset as shown on the previous page and put the 

battery compartment cover into place.

3.  Attach the desk mounting plinth (optional) in the same way as shown on 

previous page.

4.  Charge the handset for at least 24 hours. When the handset is fully charged  

the 

 icon will be displayed.

  Any additional handsets supplied as part of a multipack are pre-registered to  

the base so, once charged, are ready for use. The handset number is shown in  
the display.

1.  Press 

Menu

, scroll 

 to 

CloCk

 

&

 

AlArM

 and press 

SeleCt

.

2. 

Set

 

DAte/tiMe

 is highlighted. Press 

SeleCt

. The current date and time 

setting is displayed.

3.  Use the keypad to enter the correct time and date. Press 

ok

 to confirm.

4.  Press 

 until you return to standby.