Speed Queen AWN432SP113TW04 Manuel Du Propriétaire
TLW1995N_SVG
NOTE: High efficiency (HE) detergent is recommend-
ed for use in this machine. Look for the HE logo or
“high efficiency” on the detergent’s label.
3. Add clothes loosely into the washtub (16 lbs. [7.2 kg] maxi-
mum dry clothes load).
TLW1996N_SVG
4. Close the lid. The washer will not fill, agitate or spin with the lid
open.
TLW1997N_SVG
5. Set WASH TEMPERATURE control. (All rinses are cold.)
6. Set LOAD SIZE (water level) control. Use RESET if agitation
6. Set LOAD SIZE (water level) control. Use RESET if agitation
has started and more water is needed.
IMPORTANT: Holding the LOAD SIZE control in the
IMPORTANT: Holding the LOAD SIZE control in the
RESET position can cause flooding of the washer.
7. Select EXTRA RINSE if desired.
8. Select the cycle according to the type of fabric being washed.
8. Select the cycle according to the type of fabric being washed.
Push the timer knob in and turn clockwise to the desired cycle
and wash setting.
and wash setting.
9. Pull the timer knob out to start the water fill. Agitation will be-
gin when the water reaches the level selected.
NOTE: Lid must be closed for fill, agitation and spin
NOTE: Lid must be closed for fill, agitation and spin
to start.
The washer will stop (pause) shortly before the wash and rinse
spins. Do not turn the timer through these pauses. They are part
of the cycle.
spins. Do not turn the timer through these pauses. They are part
of the cycle.
Timer
Although the washer cycles are automatic, the timer may be reset
to lengthen, shorten or repeat a portion of a cycle.
to lengthen, shorten or repeat a portion of a cycle.
To set or reset the timer, push timer knob in to stop the washer.
Hold timer knob in firmly while turning it clockwise to the setting
desired. Pull timer knob out to start the washer.
Hold timer knob in firmly while turning it clockwise to the setting
desired. Pull timer knob out to start the washer.
Manual Soaking
1. Set the timer knob in the center of the word “RINSE” (this pre-
vents the washer from spinning without first filling with water).
2. Place the soaking product and clothes load in the washtub.
3. Pull timer knob to start washer fill.
4. After fill is completed and agitation has started (lid must be
3. Pull timer knob to start washer fill.
4. After fill is completed and agitation has started (lid must be
closed), push the timer knob in. This will stop the washer
5. When the clothes have soaked the desired length of time, TURN
THE TIMER KNOB TO THE START OF THE SPIN SETTING, then
pull the timer knob out to start the spin.
pull the timer knob out to start the spin.
CAUTION
Failure to turn the timer knob to the spin cycle and
completely drain the washtub after soaking will result
in the washer overflowing and cause property dam-
age.
W524
Optional Features
Bleach Dispenser
The bleach dispenser is located in the left front corner, under the
lid.
lid.
Use liquid bleach in the dispenser. Powdered bleach must not be
used in the dispenser. Add powdered bleach to the wash water.
used in the dispenser. Add powdered bleach to the wash water.
Use no more than one cup chlorine bleach for large loads, three-
quarters cup for medium and one-half cup for small loads.
quarters cup for medium and one-half cup for small loads.
Carefully pour recommended amount of bleach into the dispenser
during the first fill of the washer.
during the first fill of the washer.
Be careful not to spill undiluted bleach. It is a strong chemical and
can damage some fabrics if it is not properly diluted.
can damage some fabrics if it is not properly diluted.
Bleach is very corrosive and overfilling the dispenser can cause
chemical damage to the washer components. Components dam-
aged by bleach are not covered under the product warranty.
chemical damage to the washer components. Components dam-
aged by bleach are not covered under the product warranty.
Operating Your Washer
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
12
Part No. 203615R1