Frigidaire FPEH3077RF-SS Manuel Du Propriétaire

On the left side of the cooktop there are two single burners 
with a bridge element between them. When turned on, the 
bridge element allows for a larger cooking area by cycling at 
the same temperature as the left front element. For the 
bridge to be operational, the left front burner must be on. 
When the left rear burner is also on the entire left side of the 
cooktop can accommodate specialized cookware.

 

The bridge is located on the left side of the 
cooktop and must be activated in two steps.

1. Turn on the front and rear controls to the desired level 

of heat.

2. Turn the bridge control to the ON position.

Note:  The bridge element will heat at the same level as the 
front element. If either the front control or rear control is  
turned off, the bridge will also turn off. 

3. Be sure to turn the bridge control to the off position 

when finished cooking.    

 

Use only cookware specifically designed for use with the 
bridge element.

Radiant surface elements may appear to have cooled 
after they have been turned off. The hot surface indicator 
light will turn on and will continue to glow until the glass 
cooktop has cooled down to a moderate level. The glass 
surface may still be hot and burns may occur if the glass 
surface is touched before the indicator light has turned 
off. The message may remain on even though the 
controls are turned off.