Samsung RS25H5000WW/AA Manuel Du Propriétaire

Page de 96
English - 10
Flooring
For proper installation, you must place this 
refrigerator on a level, hard surface that is the 
same height as the rest of the floor. 
This surface should be strong enough to support a 
fully loaded refrigerator. 
To protect the finish of the flooring during 
installation, cut a large section of the cardboard 
carton and place it under the refrigerator where 
you are working. 
When moving the refrigerator, you need to pull and 
push it straight forwards or back. 
Do not wiggle it from side to side.
CAUTION
When installing, servicing, or cleaning behind the 
refrigerator, be sure to pull the unit straight out and 
push back in straight after finishing. 
Important: Make sure that you can easily move 
your refrigerator to its final location by measuring 
doorways (both width and height), thresholds, 
ceilings, stairways, etc. 
•  Make sure you disconnect the water supply line 
BEFORE removing the freezer door.  
To avoid damage, refer to ‘Separating the water 
line from the refrigerator’ in the manual (page 
12).
SETTING UP THE REFRIGERATOR
Installing the handles
Important : If you need to remove the refrigerator’s 
doors to move it into place, install the handles after 
you put the doors back on. 
Take the handles out of the right side door.
The handles are included in the box.
DA68-02981E-01.indb   10
14. 1. 20.     7:48
When moving your refrigerator
To prevent floor damage, be sure the front leveling 
legs are in the up position (above the floor).  
Refer to ‘Leveling the refrigerator’ in the manual 
(page 14).
SCREW DRIVER(-)
CONTROL LEVER
Fixer screw quantity is optional.