Samsung RS25H5000WW/AA Manuel Du Propriétaire
English - 11
01
SETTING
UP
How to install the handles
Orient each handle so that the end with the sticker
attached is at the top and the holes with the
tightening screws are facing each other.
Then, follow the directions below to install each
handle.
attached is at the top and the holes with the
tightening screws are facing each other.
Then, follow the directions below to install each
handle.
REMOVING THE REFRIGERATOR
DOORS
DOORS
If your entrance won’t allow the refrigerator to pass
easily through it, you can remove the refrigerator
doors.
To remove the doors, follow the steps below.
If you do not need to remove the doors, go to
“Leveling the Refrigerator” on page 14.
easily through it, you can remove the refrigerator
doors.
To remove the doors, follow the steps below.
If you do not need to remove the doors, go to
“Leveling the Refrigerator” on page 14.
Tools You’ll Need
Philips
Screwdriver
Flat-blade
Screwdriver
Wrench
1. Remove the Front Leg Cover
Open both the freezer and refrigerator doors.
Unscrew the three screws holding the front leg
cover in place by turning them counter-clockwise.
When the screws are loose, remove the front leg
cover.
Unscrew the three screws holding the front leg
cover in place by turning them counter-clockwise.
When the screws are loose, remove the front leg
cover.
SCREW
FRONT LEG
COVER
DA68-02981E-01.indb 11
14. 1. 20. 7:48
Fix the handles to the doors
by sliding them down firmly.
by sliding them down firmly.
( 1 )
( 3 )
( 2 )
L
S
By using Phillips screwdriver, fix the screw
(optional) and then put he handle on the fixer
by sliding them down firmly.
(optional) and then put he handle on the fixer
by sliding them down firmly.
( 4 )
( 5 )
L
S
By using L- wrench, fix the screw with the longer
part of it and then fully tighten up with the shorter
part.
part of it and then fully tighten up with the shorter
part.
Screw