Samsung RF32FMQDBSR Manuel Du Propriétaire

 

setting up

REMOVING THE REFRIGERATOR 
DOORS

If the refrigerator is too large to pass through your 
doorway easily, you can remove the refrigerator 
doors.

Tools you will need (Not provided)

Philips screwdriver 

(+)

Flat-blade 

screwdriver (-)

Socket wrench 

3/8'' (10 mm)

Pliers

Allen wrench 

5/32" (4 mm)

Allen wrench  

7/32'' (5 mm)

Disconnect power to the refrigerator before 
removing the doors or drawers.

•  Be careful not to drop, damage or 

scratch the doors/drawers while 
removing them.

•  Use care when you remove the doors/drawers.

The doors are heavy and you could injure 
yourself.

•  Re-attach the doors/drawers properly to avoid:

 

- Moisture from air leakage.

 

- Uneven door alignment.

 

- Wasting energy due to improper door seal.

DISASSEMBLE THE 
REFRIGERATOR DOORS

1.  With the door closed, remove the 3 screws 

holding the Top Cover (A) with a Phillips (+) 
Screwdriver, and then remove the Top Cover 
with the entire wire-harnesses attached. 

2.  Separate the two connectors on the left door 

and the one connector on the right door. If there 
are red clips on the water tube, remove them 
now. Press the white sleeve [D] of the Water 
Tube Coupler, and then separate the Water 
Tube [E].  
- Not all models have red clips.

 

Red Clip 
(6.35 mm)

3.  Pull up the Fixer Lever (B), and then pull it 

forward. 

4.  Remove the Hinge (C). 

5.  Lift up the Fridge Door and take it off.

•  While disassembling and reassembling 

the door, make sure that the electric 
wires are not peeled off.

•  Do not let the door fall down.

DA68-02918A-01.indb   10

13. 4. 25.   �� 2:30