Samsung RF32FMQDBSR Manuel Du Propriétaire
setting up
_09
01
SETTING
UP
GETTING READY TO INSTALL THE
REFRIGERATOR
REFRIGERATOR
Congratulations on your purchase of the Samsung
refrigerator. We hope you enjoy the state-of-art
features and efficiencies that this new appliance
offers.
refrigerator. We hope you enjoy the state-of-art
features and efficiencies that this new appliance
offers.
Selecting the best location for the
Refrigerator
Choose :
Refrigerator
Choose :
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with level (or nearly level) flooring.
• A location with enough space for the refrigerator
• A location without direct exposure to sunlight.
• A location with level (or nearly level) flooring.
• A location with enough space for the refrigerator
doors to open easily.
• A location that allows sufficient space to the
right, left, back, and top for air circulation. If the
refrigerator does not have enough space, the
internal cooling system may not work properly.
refrigerator does not have enough space, the
internal cooling system may not work properly.
• A location that allows you to move the
refrigerator easily if it needs maintenance or
service.
service.
Depth “A”
35 ¾” (908 mm)
Width “B”
35 ¾” (908 mm)
Height “C”
71 ¾” (1822 mm)
Overall Height “D”
72
7
/
8
” (1850 mm)
• Allow clearance to the right, left, back
and top when installing.
This will help reduce power consumption
and keep your energy bills lower.
This will help reduce power consumption
and keep your energy bills lower.
• Do not install the refrigerator in locations where
the temperature is over 109 °F (43 °C) or below
41 °F (5 °C ).
41 °F (5 °C ).
When moving your refrigerator
To prevent floor damage, be sure the front leveling
legs are in the up position (above the floor).
Refer to “HOW TO LEVEL THE REFRIGERATOR”
in the manual on page 13.
legs are in the up position (above the floor).
Refer to “HOW TO LEVEL THE REFRIGERATOR”
in the manual on page 13.
FLOORING
For proper installation, you must place this
refrigerator on a level, hard surface that is the same
height as the rest of the floor.
This surface should be strong enough to support
a fully loaded refrigerator, or approximately 406 lb
(184 kg).
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull and
push it straight forwards or back. Do not wiggle it
from side to side.
refrigerator on a level, hard surface that is the same
height as the rest of the floor.
This surface should be strong enough to support
a fully loaded refrigerator, or approximately 406 lb
(184 kg).
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull and
push it straight forwards or back. Do not wiggle it
from side to side.
setting up your refrigerator
2” (50mm)
2” (50mm)
49
15
/
32
” (1256 mm)
19 ¾” (502 mm)
59 ¾” (1517 mm)
B
A
C
D
B
A
C
D
DA68-02918A-01.indb 9
13. 4. 25. �� 2:30