Yamaha RX-A2040 Manuel Du Propriétaire
PREPARATIONS
➤ Connecting to a network device wirelessly
En
61
9
Connect the iOS device to the USB jack, and disable
the screen lock on the iOS device.
the screen lock on the iOS device.
10
Use the cursor keys (e/r) to select “NEXT” and
press ENTER.
press ENTER.
11
Tap “Allow” in the message appeared on the iOS
device.
device.
When the connection process finishes, “Completed”
appears on the TV screen.
appears on the TV screen.
12
To exit from the menu, press ON SCREEN.
■
B: Using the WPS push button
configuration
configuration
You can easily set up a wireless connection with one push of the
WPS button.
WPS button.
• This configuration does not work if the security method of your wireless router
(access point) is WEP. In this case, use other connection method.
1
Press RECEIVER z to turn on the unit.
2
Hold down INFO (WPS) on the front panel for 3
seconds.
seconds.
“Press WPS button on Access Point” appears on the front
display.
display.
3
Push the WPS button on the wireless router (access
point).
point).
When the connection process finishes, “Completed”
appears on the front display.
appears on the front display.
If “Not connected” appears, repeat from Step 1 or try
another connection method.
another connection method.
The unit (front)
About WPS
WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance,
which allows easy establishment of a wireless home network.
which allows easy establishment of a wireless home network.
ON SCREEN
ENTER
RECEIVER
z
1 2 3 4 5 6 7 8 9 10
Cursor keys