Yamaha RX-A2040 Manuel Du Propriétaire

PREPARATIONS

➤ Connecting to a network device wirelessly

En

■

If your wireless router (access point) does not support WPS push 
button configuration method, follow the procedure below to 
configure the wireless network settings.

Press RECEIVER z to turn on the unit.

• Operations with TV screen are available only when your TV is connected to 

the unit via HDMI.

Use the cursor keys (e/r) to select “Network”.

Use the cursor keys (q/w) to select “Network 
Connection” and press ENTER.

Use the cursor keys (q/w) and ENTER to check 
“Wireless (Wi-Fi)” and select “OK”.

• The checkmark indicates the current setting.

Use the cursor keys (q/w) and ENTER to select the 
desired connection method and select “NEXT”.

The following connection methods are available.

You can set up a wireless connection with the 
WPS button while viewing the TV screen. Follow 
the instructions displayed on the TV screen.

See “Sharing the iOS device setting” (p.60).

You can set up a wireless connection by 
searching for an access point. For details on 
settings, see “Searching for an access point” 
(p.63).

You can setup a wireless connection by entering 
the required information (such as SSID)
manually. For details on settings, see “Setting up 
the wireless connection manually” (p.63).

You can set up a wireless connection by entering 
the unit’s PIN code into the wireless router 
(access point). The method is available if the 
wireless router (access point) supports the WPS 
PIN code method. For details on settings, see 
“Using the PIN code” (p.64).

z