Electrolux EW30GS80RS Manuel De Montage
13
30" GAS SLIDE-IN RANGE INSTALLATION INSTRUCTIONS
(Models with Sealed Top Burners)
Fig. 20
12.
Check Operation
Refer to the Use and Care Guide packaged with the
range for operating instructions and for care and
cleaning of your range.
Remove all packaging from the oven before testing.
Remove all packaging from the oven before testing.
12.1
Check Burner Cap Placement
Regular burner
It is
very important to be sure that all surface burner
caps and burner grates are properly installed and in
the correct locations
before operating the appliance.
Please note that the burner heads are secured to
the cooktop.
The cooktop is not removable. Do not
attempt to remove or lift the cooktop.
To prevent flare-ups and avoid
creation of harmful by-products, do not use the cooktop
without all burner caps properly installed to insure
proper ignition and gas flame size.
Always keep the burner caps and burner grates in
Always keep the burner caps and burner grates in
place whenever the surface burners are in use.
DO
not allow spills, food, cleaning agents or any other
material to enter the gas orifice holder openings.
Check and be sure the size of each burner cap
Check and be sure the size of each burner cap
matches the size of the burner head. Check and be
sure that all round style burner caps are correctly in
place on round burner heads.
Check and be sure that all oval style burner caps are
Check and be sure that all oval style burner caps are
correctly in place on oval burner heads (if equipped).
Check and be sure that all dual or twin style burner
caps are correctly in place on dual or twin heads (if
equipped).
On round style burners, the burner cap lip (Figure 17)
On round style burners, the burner cap lip (Figure 17)
should fit snug into the center of burner head and be
level. Refer to figures 18 & 19 for correct and incorrect
burner cap placement.
Once in place, you may check the fit by gently sliding
Once in place, you may check the fit by gently sliding
the burner cap from side to side (Figure 20) to be sure
it is centered and firmly seated. When the burner cap lip
makes contact inside the center of the burner head you
will be able to hear the burner cap click. Please note
that the burner cap should NOT move off the center of
the burner head when sliding from side to side.
Dual Flame burner (If equipped)
Remove all tapes from burner cap Be sure that the
dual flame burner caps are correctly placed BEFORE
using your cooktop.
Note: There are no burner adjustments necessary on
this cooktop.
Burner Cap
Burner
Head
Fig. 17
Burner
Cap Lip
Correct
Burner Cap
Placement
Fig. 18
Incorrect
Burner Cap
Placement
Fig. 19
Figure 21
Burner Cap
Burner Simmer
Precision Flame
Burner
Head