Electrolux EW30GS80RS インストール手順

Refer to the Use and Care Guide packaged with the 

range for operating instructions and for care and 

cleaning of your range.
Remove all packaging from the oven before testing.

It is 

very important to be sure that all surface burner 

caps and burner grates are properly installed and in 

the correct locations 

before operating the appliance. 

Please note that the burner heads are secured to 

the cooktop. 

The cooktop is not removable. Do not 

attempt to remove or lift the cooktop.

 To prevent flare-ups and avoid 

creation of harmful by-products, do not use the cooktop 

without all burner caps properly installed to insure 

proper ignition and gas flame size.
Always keep the burner caps and burner grates in 

place whenever the surface burners are in use. 

material to enter the gas orifice holder openings.
Check and be sure the size of each burner cap 

matches the size of the burner head. Check and be 

sure that all round style burner caps are correctly in 

place on round burner heads.
Check and be sure that all oval style burner caps are 

correctly in place on oval burner heads (if equipped). 

Check and be sure that all dual or twin style burner 

caps are correctly in place on dual or twin heads (if 

equipped).
On round style burners, the burner cap lip (Figure 17) 

should fit snug into the center of burner head and be 

level. Refer to figures 18 & 19 for correct and incorrect 

burner cap placement.
Once in place, you may check the fit by gently sliding 

the burner cap from side to side (Figure 20) to be sure 

it is centered and firmly seated. When the burner cap lip 

makes contact inside the center of the burner head you 

will be able to hear the burner cap click. Please note 

that the burner cap should NOT move off the center of 

the burner head when sliding from side to side.

Remove all tapes from burner cap Be sure that the 

dual flame burner caps are correctly placed BEFORE 

using your cooktop.