Philips BTB2462/05 Guide D’Installation Rapide

Note for mounting
To secure the mounting on wall, concrete wall is required.

1.  Use this sheet as a template. Mark the position where you want to hang the device on the wall (as 

shown above) and then drill two 6mm diameter holes.

2.  Secure the 2 dowels and 2 screws (both supplied) in the holes respectively. Leave a gap of 5 mm 

between the head of the screw and the wall.

3.  Hang the device on the fastening screws.

BTB2462_05 Wall Mounting_V1.0