Philips BTB2462/05 Guida All'Installazione Rapida
Note for mounting
To secure the mounting on wall, concrete wall is required.
To secure the mounting on wall, concrete wall is required.
Use screws to mount the device on the wall
1. Use this sheet as a template. Mark the position where you want to hang the device on the wall (as
shown above) and then drill two 6mm diameter holes.
2. Secure the 2 dowels and 2 screws (both supplied) in the holes respectively. Leave a gap of 5 mm
between the head of the screw and the wall.
3. Hang the device on the fastening screws.
BTB2462_05 Wall Mounting_V1.0
140 mm (5.51")
Wall mounting instructions
Drill holes on wall at hole
positions marked.*