Q-Logic 59047-10 D Manuel D’Utilisation
3–MIB-II Objects
snmpOutTraps (1.3.6.1.2.1.11.29)
59047-10 D
3-61
snmpOutTraps (1.3.6.1.2.1.11.29)
The total number of SNMP Trap PDUs generated by the SNMP protocol entity.
Syntax
Counter
Access
read-only
Status
mandatory
snmpEnableAuthenTraps (1.3.6.1.2.1.11.30)
Indicates whether the SNMP agent process is permitted to generate
authentication-failure traps. The value of this object overrides any configuration
information; as such, it provides a means whereby all authentication-failure traps
may be disabled.
authentication-failure traps. The value of this object overrides any configuration
information; as such, it provides a means whereby all authentication-failure traps
may be disabled.
It is strongly recommended that this object be stored in non-volatile memory so
that it remains constant between re-initializations of the network management
system.
that it remains constant between re-initializations of the network management
system.
Syntax
INTEGER { enabled(1), disabled(2) }
Access
read-write
Status
mandatory
Return Value
Read returns enabled (1) if AuthFailureTrap = True, otherwise disabled (2).
Writes not supported.
Writes not supported.
The ifXTable
ifName (1.3.6.1.2.1.31.1.1.1.1)
The textual name of the interface. The value of this object should be the name of
the interface as assigned by the local device. If there is no local name, or this
object is otherwise not applicable, then this object contains a zero-length string.
the interface as assigned by the local device. If there is no local name, or this
object is otherwise not applicable, then this object contains a zero-length string.
Syntax
DisplayString
Access
read-only
Status
current