Q-Logic 59047-10 D Manuel D’Utilisation
3–MIB-II Objects
ifOutBroadcastPkts (1.3.6.1.2.1.31.1.1.1.5)
59047-10 D
3-63
ifOutBroadcastPkts (1.3.6.1.2.1.31.1.1.1.5)
The total number of packets that higher-level protocols requested be transmitted,
and which were addressed to a broadcast address at this sub-layer, including
those that were discarded or not sent.
and which were addressed to a broadcast address at this sub-layer, including
those that were discarded or not sent.
Syntax
Counter32
Access
read-only
Status
current
ifHighSpeed (1.3.6.1.2.1.31.1.1.1.15)
An estimate of the interface's current bandwidth in units of 1,000,000 bits per
second. If this object reports a value of `n' then the speed of the interface is
somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not
vary in bandwidth or for those where no accurate estimation can be made, this
object should contain the nominal bandwidth. For a sub-layer which has no
concept of bandwidth, this object should be zero.
second. If this object reports a value of `n' then the speed of the interface is
somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not
vary in bandwidth or for those where no accurate estimation can be made, this
object should contain the nominal bandwidth. For a sub-layer which has no
concept of bandwidth, this object should be zero.
Syntax
Gauge32
Access
read-only
Status
current
ifPromiscuousMode (1.3.6.1.2.1.31.1.1.1.16)
This object has a value of false(2) if this interface only accepts packets/frames
that are addressed to this station. This object has a value of true(1) when the
station accepts all packets/frames transmitted on the media.
that are addressed to this station. This object has a value of true(1) when the
station accepts all packets/frames transmitted on the media.
true(1)
false(2)
Syntax
TruthValue
Access
read-only
Status
current