ADC Campus-REX2 RS Manuel D’Utilisation
Chapter 1 - Installing and Accessing the REX2
4
Campus-REX2 RS Interface Card User Manual
Installing into a Campus-Star Chassis
The Campus-REX2 must be installed into a Campus-Star chassis first, before
you install the corresponding Campus-RS or Campus-HRS line unit.
you install the corresponding Campus-RS or Campus-HRS line unit.
1
Ensure that a line unit is not installed in the line-unit slot corresponding
to the slot where you will install the Campus-REX2.
to the slot where you will install the Campus-REX2.
2
Slide the Campus-REX2 into the guide rails of the selected slot at the rear
of the Campus-Star chassis.
of the Campus-Star chassis.
The Campus-REX2 is not hot-swappable. Damage may occur
to the Campus-REX2, the line unit, or both if the line unit is
installed before you install the Campus-REX2.
to the Campus-REX2, the line unit, or both if the line unit is
installed before you install the Campus-REX2.
620
D
S
X
-1/T
C
FG
DSX-1
620
D
S
X
-1/T
C
FG
DSX-1
Campus-REX2 RS Interface card
Campus-Star
chassis
chassis
REX2 Router
10 Base-T
100 Base-Tx
Link/Activity
M
D
I-X
P
C
H
U
B
M
D
I