Honeywell HEGS5000 Manuel D’Utilisation
6.1 INTRODUCTION, CONTINUED
The initial display after a user logs on the controller is shown below.
The operator has control of camera 1 and Spot Monitor 1 (multiplexer 1).
Tip: Press
+
and
–
to select the next or previous camera.
Tip: Press Monitor (
) followed by
+
or
-
to select the next or previous spot
monitor.
6.2
SPOT MONITOR OPERATION
The Spot monitor operates in two modes: Absolute and Relative. The HEGS5001 is in
absolute mode as shown below by default.
absolute mode as shown below by default.
<Spot01 Cam001>
<Spot01 Cam001>
To toggle between Absolute and Relative modes, press the CAMERA key twice quickly.
Camera (
) Camera (
)
The SPOT still shows the multiplexer number while the CAM shows the input of that
multiplexer with an asterisk in front of the number.
multiplexer with an asterisk in front of the number.
<Spot01 Cam*01>
Rev. 1.01
44 900.0800
19-Jun-06