Honeywell HEGS5000 Manuel D’Utilisation
6.3 MULTIPLEXER
CONTROL
The HEGS5001 controller sends basic commands to the multiplexer to simulate pressing
the buttons on the front panel of the multiplexer. Refer to the Multiplexer User Manual
the buttons on the front panel of the multiplexer. Refer to the Multiplexer User Manual
for details on the operation of the multiplexer.
ICON
KEY
DESCRIPTION
MUX
Press once to send a single multiplexer command (LED
will flash). Press twice to lock the controller in multiplexer
mode. A steady LED indicates the controller is locked in
multiplexer mode. To exit the Multiplexer mode, press
the MUX (
will flash). Press twice to lock the controller in multiplexer
mode. A steady LED indicates the controller is locked in
multiplexer mode. To exit the Multiplexer mode, press
the MUX (
) key
+/-
When in multiplexer mode, press + or – to scroll through
the available options on the controller LCD. Press Enter
when the desired option is displayed.
the available options on the controller LCD. Press Enter
when the desired option is displayed.
Select – Select a multiplexer (001-016)
Review – VCR Review mode
Zoom – Access/Exit the multiplexer zoom menu
Set – Mimics the Set key on the multiplexer
2
nd
– Mimics the 2
nd
key on the multiplexer
Menu – Access/Exit the multiplexer menu (not
available on all models)
available on all models)
Joystick Knob
In the multiplexer setup menu, the joystick zoom in
function mimics the SET button.
function mimics the SET button.
Joystick (Left, Right
Up, Down)
Up, Down)
The LEFT, RIGHT, UP, and DOWN directions of the
joystick mimic the multiplexer cursor keys.
The LEFT, RIGHT, UP, and DOWN directions of the
joystick mimic the mouse X/Y movements.
The joystick ZOOM IN function mimics the Set key or the
Left Mouse Button.
joystick mimic the multiplexer cursor keys.
The LEFT, RIGHT, UP, and DOWN directions of the
joystick mimic the mouse X/Y movements.
The joystick ZOOM IN function mimics the Set key or the
Left Mouse Button.
Full Screen
Places the multiplexer into full screen mode.
Picture-in-Picture
Places the multiplexer in picture-in-picture (PIP) mode.
Press again to reverse the cameras in the PIP.
Press again to reverse the cameras in the PIP.
2 x 2 Display
Places the multiplexer into 2 x 2 mode. Continue
pressing to view different 2x2 screens.
pressing to view different 2x2 screens.
3 x 3 Display
Places the multiplexer into 3 x 3 mode.
4 x 4 Display
Places the multiplexer into 4 x 4 mode.
Sequence
Places the multiplexer into sequence mode. Select
sequence 1 or 2 from the soft menus.
sequence 1 or 2 from the soft menus.
Freeze
Places the multiplexer into freeze mode.
Live Record
Used to record a select camera
Rev. 1.01
46 900.0800
19-Jun-06