3com WX1200 3CRWX120695A Manuel D’Utilisation
732
C
HAPTER
24: B
OOT
P
ROMPT
C
OMMANDS
See Also
fver
Displays the version of a system image file installed in a specific location
on a WX switch.
on a WX switch.
Syntax —
fver {c: | d: | e: | f: | boot0: | boot1:}
[filename]
c:
— Nonvolatile storage area containing boot partition 0 (primary).
d:
— Nonvolatile storage area containing boot partition 1 (secondary).
e:
— Primary partition of the flash card in the flash card slot.
f:
— Secondary partition of the flash card in the flash card slot.
boot0:
— Boot partition 0.
boot1:
— Boot partition 1.
filename
— System image filename.
Defaults — None.
DEVICE
Location of the system image file:
c: — Nonvolatile storage area containing boot partition 0
d: — Nonvolatile storage area containing boot partition 1
e: — Primary partition of the flash card in the flash card slot
f: — Secondary partition of the flash card in the flash
card slot
card slot
boot0 — boot partition 0
boot1 — boot partition 1
FILENAME
System image file name.
FLAGS
Number representing the bit settings of boot flags to pass to
the booted system image.
the booted system image.
OPTIONS
String up to 128 bytes of boot options to pass to the booted
system image.
system image.
Table 121 Output of display command (continued)
Field
Description