Standard Horizon PS1000 Manuel D’Utilisation
Page 43
Phantom PS1000
1. Press and hold down the [CALL(SET)MENU] key
until “
RADIO SETUP
” menu appears.
2. Press the [
] key to select “
DSC SETUP
” menu,
then press the [CALL(SET)MENU] key.
3. Press the [
] or [] key to select “
POS REQUEST
”
menu, then press the [CALL(SET)MENU] key.
4. Press the [
] or [] key to select “
Au
” or “
oF
.”
In “
Au
” mode, after a DSC Position Request is re-
ceived, the radio will automatically transmit your vessels po-
sition. In “
sition. In “
oF
” mode, the CMP25 RAM+ Microphone’s dis-
play will show who is requesting the position.
5. Press the [CALL(SET)MENU]] key to store the selected setting.
6. To exit this menu and return to radio operation mode press the [16/9] key.
6. To exit this menu and return to radio operation mode press the [16/9] key.
The PS1000 has the capability to turn off the Position Request ringer.
1. Press and hold down the [CALL(SET)MENU] key
1. Press and hold down the [CALL(SET)MENU] key
until “
RADIO SETUP
” menu appears.
2. Press the [
] key to select “
DSC SETUP
” menu,
then press the [CALL(SET)MENU] key.
3. Press the [
] or [] key to select “
DSC BEEP
” menu,
then press the [CALL(SET)MENU] key.
4. Press the [
] or [] key to select “POS REQUEST,”
then press the [CALL(SET)MENU] key.
5. Press the [
] or [] key to select “oF.”
6. Press the [CALL(SET)MENU] key to store the se-
lected setting.
7. To exit this menu and return to radio operation mode
press the [16/9] key.
If you wish to return to enabling the ringer tone, just repeat the above proce-
dure, pressing the [
dure, pressing the [
] or [] key to select “on” in step “5” above.
11.8.2 Transmitting a Position Request to Another Vessel
1. Press the [CALL(SET)MENU] key. The DSC Op-
eration menu will appear.
2. Press the [
] or [] key to select “
POS REQUEST
”
menu, then press the [CALL(SET)MENU] key. The
transceiver will beep, and the “Position Request direc-
tory” will appear. (To cancel, press the [16/9] key)
transceiver will beep, and the “Position Request direc-
tory” will appear. (To cancel, press the [16/9] key)
3. Press the [
] or [] key to select the “name” you
want to contact.
4. Press the [CALL(SET)MENU] key to transmit the