Smeg LSA4551B Manuel D’Utilisation

Reference program

(*) ECO program

Load

9

place-settings

Type of detergent

B

Amount of detergent

30 g

Rinse aid setting

Depending on the model 3/4 or 4/6

START PROGRAM
To start the dishwasher, press the START/PAUSE button (4) for a few seconds, until
the light of the first phase of the selected program starts to flash (confirmation beep).

As the program runs, the PHASES/PROGRAM lights (8) will indicate the current cycle
status:

END PROGRAM
When the program finishes, a buzzer sounds briefly and all the
PROGRAM PHASES lights (8) flash. Press any of the SELECTION
PROGRAMS  buttons (2), stops the light flashins, and the
dishwasher is now ready to perform a new cycle; opening and
shutting the door or switching the appliance off and on has the same
effect.

INTERRUPTION OF A PROGRAM
In order to interrupt a running program it is necessary:
• press 

the 

START/PAUSE button (4), the light of the current phase goes out;

•  keep the button pressed until the PROGRAM PHASES lights (8) come on (confirmation

buzzer).

The light of the phase in progress will flash, while
the lights of previous and subsequent phases remain on.
N.B.

during execution of programs which do not

include a prewash, the first PHASES/PROGRAM light
(8) will remain off.